Jaguar E-Type Series 1.5 Complete Body Rubber Kit - 18-0518

SKU: 18-0518

E-Type Series 1.5 Roadster.
Sold Per: KIT
Estimated Quantity Available: 0

Unique Item

Availability: This item is Built-to-Order and usually ships within one business day.

Was: $493.59

Sale: $441.50

Description

Save 10% off individual prices when you purchase the whole kit! XKs Unlimited sells the most comprehensive rubber kits in the business. If you want the best kit on the market, here it is. Our kits are designed to provide everything you need for a comprehensive, bare-metal repaint. All door, boot, lamp and glass seals are included. Interior and engine compartment items are not.

Part Number	Description	Qty Per Kit	Notes
BD-10313	CLIP	18	Secure front bumper rubber ends (4) and door glass squeegee strips (14)
BD-15746	LAMP GASKET	2	License Lamp, Inner
BD-18947/1	BUMPER SEAL, REAR	2	Between rear bumpers and body
BD-18947/3	BUMPER SEAL, FRONT	2	Between front bumpers and body; secured with BD-10313 clips
BD21800	TOP SIDE SEAL	2	Glued to top frame in one piece and then cut at joints
BD-22312	CLIP	10	Secures "fuzzy strips" on inner surface of door glass
BD-22536	GAS LID BUFFER	2	Small rubber buttons to cushion gas filler lid
BD25715/1	TRUNK/BOOT LID SEAL	1	Pushes on to flange
BD-24789	SILL SEAL	2	At bottom of door openings, proper molded type; glued in place
BD-25898/99	SEAL, SHUT POST	1 PR	Door jamb at rear, glued in channel; proper molded in top curve
BD-28523	RUBBER BUFFER	8	Square rubber pad, between body and bumper brackets (See Note #1)
BD-33326/1	"EVERSEAL" STRIP	1	Seals joint between windshield glass and chrome (See Note #2)
BD-37782-1	TOP-TO-WINDSCREEN SEAL	1	Seals top frame to top of windscreen
BD-6581	RUBBER PLUG	4	Seals holes behind license plate
JA-8607	TURN SIGNAL LENS PAD	1 PR	Pads between front turn signal lenses and lamp body
JA-8620	REAR LENS PADS	1 PR	Pads between rear lenses and lamp body
JA-8716	LAMP GASKET	1	Gasket between reverse lamp lens and lamp body
JA-8717	LAMP GASKET	1	Gasket, reverse lamp body
JA-8773	LENS GASKET	2	License lamps
LU-54521488	HEADLAMP GASKET	2	Seals headlamp unit to body
18-00232	OVER RIDER SEAL	6'	Seal between over riders and bumpers
18-2003	COWL SEAL	1	Cushions rear edge of bonnet, glued into channel near base of windshield
18-2007	FRONT LAMP PADS	1 PR	Pad between front lamps and body
18-2007	FRONT LAMP PADS	1 PR	Pad between front lamps and body
18-2009	REAR LAMP PADS	1 PR	Pad between rear lamps and body
18-2015PR	A-POST SEAL, PAIR	1 PR	Major seal for leading edge of doors; glued to body (See Note #3)
18-2017	WINDSHIELD SEAL	1	Holds windshield in place -- requires locking strip below (See Note #4)
18-2017-1	W/S LOCK STRIP	10'	Fits in channel of windshield seal; expands it to make tight seal
18-2020	CHANNEL FELT	8'	For door glass channels. Push in to channels and trim flush.
18-2024	DOOR FRAME RUBBER SEAL	3'	Leading edge of door frame; fits in channel; 1.5' required per side.
18-2031	HEADLAMP FINISHER SEAL	2	Seal under headlamp chrome finishers (See Note #5)
18-2050	WINDOW SEAL	2	Squeegee seal; between door and outer surface of door glass. Clips in place
18-2051	24" FUZZY STRIP	2	Fuzzy seal; between door and inner surface of door glass, clips in place
18-2723	BEZEL PAD	3	Under chrome windshield wiper bezels
18-2752	MUDSHIELD SEAL	6'	Mud shields under bonnet; riveted in place

Notes
1: These were fitted to the rear of later cars, but many customers prefer to fit them at all attaching points. Use as you see fit.
2: We liberally coat this and the chrome with WD40, install chrome and clamp. Trim flush the next day. The WD40 acts as a solvent
3: A coupe A-Post seal is supplied. Cut for roadster.
4: A coupe windshield seal is supplied. Cut for roadster.
5: Does not have pre-drilled holes; customer must drill holes for attachment rivets.

Details

SKU: 18-0518
Stock #: 18-0518
Brand: XKs Unlimited Manufactured Parts
Model Series: E-Type Series I.5 4.2 1967.5-1968
Availability Remarks: This item is Built-to-Order and usually ships within one business day.
Condition: New