Home - Return to Previous Page
Click on image to zoom

Jaguar E-Type Series III Complete Body Rubber Kit - 38-0515

38-0515
E-Type Series III Roadster, 1971-1973.
Sold Per: KIT
Estimated Quantity Available: 1
Pricing: $549.99
Qty:

Description

Save 10% off individual prices when you purchase the whole kit! XKs Unlimited sells the most comprehensive rubber kits in the business. If you want the best kit on the market, here it is. Our kits are designed to provide everything you need for a comprehensive, bare-metal repaint. All door, boot, lamp and glass seals are included. Interior and engine compartment items are not.

Part Number Description Qty Per Kit Notes
BD10313 CLIP 8 Secures front bumper seals to body
BD18947/3 BUMPER SEAL, FRONT 2 Between front bumpers and body
BD18947/4 BUMPER SEAL, REAR 1 Between rear bumper and body
BD21073/4 WINDOW WIPE 2 Outer squeegee seal, door glass
BD22312 CLIP 10 Secure door glass "fuzzy strips" to upper door
BD22536 GAS LID BUFFER 2 Small rubber buttons to cushion gas filler lid
BD25715/1 TRUNK SEAL 1 Around perimeter of trunk/boot opening; pushes on
BD28447/1 LWB SILL SEAL 2 At bottom of door openings, proper molded type; glued in place
BD28523 RUBBER BUFFER 6 Between front (4) and rear bumpers (2) and body
BD33326/1 "EVERSEAL" STRIP 1 Seals joint between windshield glass and chrome (See Note #1)
BD35733 MARKER GASKET, REAR 2 Pad between body and side marker lamp
BD37726 MARKER GASKET, FRONT 2 Pad between body and side marker lamp
BD37782-1 TOP-TO-WINDSCREEN SEAL 1 Seals top frame to top of windscreen
BD38155 LAMP PAD, RH 1 Tail Lamp Unit to Body, Right
BD38156 LAMP PAD, LH 1 Tail Lamp Unit to Body, Left
12339 LAMP GASKET 1 License lamp lens gasket
159-110 LAMP GASKET 4 Reverse lamp lens and body gasket
209 OVER RIDER SEAL 6 Rubber between bumper over riders and bumper blades
164-060 HEADLAMP GASKET 2 Head lamp bucket to body
38-1500 WINDOW SEAL 6' Top frame to side window
BD20903/1 COWL SEAL 1 Cushions rear edge of bonnet, glued into channel near base of windshield
12426 LENS PAD, T/S 2 Front turn signals lenses to lamp bodies, same right or left
8608-2L LAMP PAD, LH 1 Front turn signal lamp unit to body, left
8608-2R LAMP PAD, RH 1 Front turn signal lamp unit to body, right
38-2008 FOAM LENS PAD 2 Tail lamp lenses to tail lamp body, same right or left
BD30301 A-POST SEAL 3 Used on A-posts and door shut faces (See Note #2)
BD21964/2 WINDOW FRAME "T" SEAL 3 Leading edge of door window frame
BD20499-1 WINDSHIELD LOCK STRIP 10' Fits in channel of windshield seal; expands it to make tight seal
BD20499-3 WINDSHIELD SEAL 1 Holds windshield in place -- requires locking strip below.
38-2020 CHANNEL FELT 8' For door glass channels. Push in to channels and trim flush.
11728 LENS GASKET 4 Side marker lenses to side marker lamp bodies
BD35729 HEADLIGHT RUBBER 2 Under chrome finishers -- perimeter of "sugar scoops" (See Note #3)
BD20010/3-2 FUZZY STRIP 32" 2 Inner surface of door glass
8656 BEZEL PAD 2 Pad under windshield washer bezels
BD20434 MUDSHIELD SEAL 8' On mud shields under bonnet


Notes
1: We liberally coat this and the chrome with WD40, install chrome and clamp. Trim flush the next day. The WD40 acts as a solvent to soften the rubber and ensure a tight seal. The rubber is supposed to stay soft.
2: Three pieces supplied: two for the A-posts and a third to cut in half for the door shut face seals.
3: Does not have pre-drilled holes; installer must drill holes for attachment rivets.

California Residents: Prop 65 Warning

WARNING: Cancer and Reproductive Harm

Note: This item replaces part number 18-0515.

Kit Pricing

Save 5% to 20% when purchased as a Kit instead of separately

Details

Shipping Information

  • Item Requires Shipping
  • 16.0 lbs.
  • W10.0000” x H6.0000” x L32.0000”

Model/Series

Browsing

Quick Look-Up

Shop by Brand

User Information