Home - Body - Body Rubber Complete Kits
Click on image to zoom

Jaguar E-Type Series II Complete Body Rubber Kit - 18-0512

18-0512
E-Type Series II Roadster.
Sold Per: KIT
Estimated Quantity Available: 1
Pricing: $529.99
Qty:

Description

Save 10% off individual prices when you purchase the whole kit! XKs Unlimited sells the most comprehensive rubber kits in the business. If you want the best kit on the market, here it is. Our kits are designed to provide everything you need for a comprehensive, bare-metal repaint. All door, boot, lamp and glass seals are included. Interior and engine compartment items are not.

Part Number Description Qty Per Kit Notes
BD18947/3 BUMPER SEAL, FRONT 2 Between front bumpers and body; clips retain ends
BD10313 CLIP, BUMPER & WINDOW SEAL 14 Secures front bumper-to-body seal (4) and door squeege seal (14)
BD28523 RUBBER BUFFER 8 Square rubber pad, between body and front bumper brackets (see Note #1)
BD21800 TOP SIDE SEAL 2 Glued to top frame in one piece and then cut at joints
BD22536 GAS LID BUFFER 2 Small rubber buttons to cushion gas filler lid
BD24789 SILL SEAL 2 At bottom of door openings, proper molded type; glued in place
BD25715/1 TRUNK SEAL 1 Around perimeter of trunk/boot opening; pushes on
BD25898/99 SEAL, SHUT POST 1 PR Door jamb at rear, glued in channel; proper molded in top curve
BD33326/1 "EVERSEAL" STRIP 1 Seals joint between windshield glass and chrome (See Note #2)
BD35733 MARKER GASKET, REAR 2 Between rear side marker lamps and body
BD35977/1 BUMPER SEAL, REAR 1 Between rear bumper and body
BD37726 MARKER GASKET, FRONT 2 Between front side marker lamps and body
BD37782-1 TOP-TO-WINDSCREEN SEAL 1 Seals top frame to top of windscreen
BD38155 LAMP PAD, RH 1 Rubber between tail lamp and body (See Note #3)
BD38156 LAMP PAD, LH 1 Rubber between tail lamp and body (See Note #3)
12339 LAMP GASKET 1 Between license lamp housing and license lamp lens
159-110 LAMP GASKET 4 Seals reverse lamp lenses and reverse lamp body
209 OVER RIDER SEAL 8 Between bumper over riders and bumpers
164-060 HEADLAMP GASKET 2 Seals headlamp unit to body
BD20903/1 COWL SEAL 1 Cushions rear edge of bonnet, glued into channel near base of windshield
12426 LENS PAD, TURN SIGNALS 2 Pad between turn signal lenses and turn signal lamp body
8608-2L LAMP PAD, LH 1 Gasket between front turn signal lamp and body, left
8608-2R LAMP PAD, RH 1 Gasket between front turn signal lamp and body, right
38-2008 FOAM LENS PAD 2 Foam pad between tail lamp lenses and tail lamp bodies
BD25716/7 A-POST SEAL, PAIR 1 PR Major seal for leading edge of doors; glued to body (See Note #4)
BD20499 WINDSHIELD SEAL 1 Holds windshield in place -- requires locking strip below (See Note #5)
BD20499-1 W/S LOCK STRIP 11' Fits in channel of windshield seal; expands it to make tight seal
38-2020 CHANNEL FELT 8' For door glass channels. Push in to channels and trim flush.
38-2024 DOOR FRAME RUBBER SEAL 3' Leading edge of door frame; fits in channel; 1.5' required per side.
11728 LENS GASKET 4 Seals side marker lenses to chrome lamp housings
BD35729 HEADLIGHT RUBBER 2 Between body and headlamp opening finishers (See Note #6)
BD16700 WINDOW SEAL 2 Squeegee seal; between door and outer surface of door glass. Clips in place
BD20010/3 24" FUZZY STRIP 2 Fuzzy seal; between door and inner surface of door glass, clips in place
BD22312 CLIP FOR FUZZY STRIP 10 Attaches fuzzy window seal; five per side
8656 BEZEL PAD 3 Under chrome windshield wiper bezels
BD20434 MUDSHIELD SEAL 7' Mud shields under bonnet; riveted in place


Notes
1: These were fitted to the rear of later cars, but many customers prefer to fit them at all attaching points. Use as you see fit.
2: We liberally coat this and the chrome with WD40, install chrome and clamp. Trim flush the next day. The WD40 acts as a solvent to soften the rubber and ensure a tight seal. The rubber is supposed to stay soft.
3: There are two tail lamp configurations but only one gasket type is available. You may have to trim the middle to clear the bulb sockets.
4: A coupe A-Post seal is supplied. Cut for roadster.
5: A couple windshield is supplied. Cut for roadster.
6: Does not have pre-drilled holes. Holes for attaching rivets must be cut by customer.
Also note that you might not receive one continuous piece of rubber in some cases where the items is sold per foot. You might receive two pieces at least five feet long when the car requires a total of ten feet.

California Residents: Prop 65 Warning

WARNING: Cancer and Reproductive Harm

Note: This item replaces part number 18-0512.

Kit Pricing

Save 5% to 20% when purchased as a Kit instead of separately

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W10.0000” x H6.0000” x L32.0000”

Model/Series

Browsing

Quick Look-Up

Shop by Brand

User Information